Sample Sales Invoice Template

1. Sample Sales Invoice Template 2

"Sample Sales Invoice Form 2" was found to be relative to Sample Sales Invoice Template with the score grade of 97.

• In Excel 2003 click the Design Mode button on the Control Toolbox toolbar. Tip: If the Control Toolbox toolbar is invisible, click Excel menu View > Toolbars > Control Toolbox.
• In Excel 2007, Excel 2010 and Excel 2013, click the Design Mode button in the Controls group of the Developer tab.

  (From Detail Page - about 53 words) - TIP: If the Developer tab is not available in Excel 2007, do the following to display it: a) Click Microsoft Office Button, and then click Excel Options; b) In the Popular category, under Top options for working with Excel, select the Show Developer tab in the Ribbon check box, and then click OK.

  (From Detail Page - about 49 words) - Or in Excel 2010 and Excel 2013 to display the Developer tab: a) Click File > Options > Customize Ribbon; b) In the area on the right, ensure that the box next to Developer is checked; c) When you click OK, the Developer tab will appear in the ribbon.

(From Detail Page - about 23 words) - Once you have finished your design work for Sample Sales Invoice Template 2, click the Design Mode button again to exit design mode.

(From Detail Page - about 236 words) - Moving a cell or a group of cells is easy in Excel. First, you click to select the cell or drag your mouse to select all the cells you want to move. And then, drag the border of the selected area to move it to the new location where you want to place the cell or cells. The moving content will overwrite the content in the target location, so make sure the target range is empty (not used) in Sample Sales Invoice Template 2 before doing the movement. And, if the target location contains merged cells, sometimes the movement fails. So it is also helpful to make sure the target location does not contain merged cell. If the target location Sample Sales Invoice Template 2 is overlapping the original range and the original range contains merged cells, the movement could also fail because you cannot change part of merged cell - if this happens, you need to first move the cells to a temporal location in Sample Sales Invoice Template 2 that are empty (i.e. not used), unmerge cells, and then move the cells from the temporal location to the desired location. If you need to unmerge a cell, first select it and then click the "Merge and Center" command on the Format toolbar in Excel 2003; or click the "Merge and Center" command on the Home ribbon tab in Excel 2007, 2010 and Excel 2013.

LEARN MORE PDF

2. Sample Sales Invoice Template: Fixed Items

"Sales Template with Fixed Items" was found to be relative to Sample Sales Invoice Template with the score grade of 77.

(From Detail Page - about 38 words) - "Sample Sales Invoice Template: Fixed Items" is a sample invoice that demonstrates how to use fixed or static product items on the body part of the printable invoice form. It is a sales template thus including shipping fields.

(From Detail Page - about 164 words) - In some businesses the number of products or service items offered are limited, i.e. the client / customers always order the same group of products / services from the company. It would be nice to have the invoice form always leaves the item#, item description, or even item unit price there and does not change them from invoice to invoice. We call these static or fixed items because they don't change. Using static and fixed items prevent you from type or choose the same product items again and again, saving your time and avoiding typo mistakes. The fixed items even won't get cleared when you execute "Clear & New" with Uniform Invoice Software installed - it sounds interesting because the "Clear & New" command is designed to clear all the content to make it a blank invoice form for next new invoice. So how do we tell the "Clear & New" command not to touch the items that shouldn't change from invoice to invoice?

(From Detail Page - about 67 words) - Looking into Uniform Invoice Software documents you'll find that although the command clear every fields, there are two exceptions - the cells that have formulas defined, and the cells that are locked. As detailed at Invoice Form with Fixed or Static Product / Service Items on office-kit.com, what we do is just enabled the "Locked" of the cells that you want to keep from invoice to invoice.

LEARN MORE PDF

3. Sample Sales Invoice Template: Using Handwriting Signature

"Sample Sales Invoice Template: Using Handwriting Signature" was found to be relative to Sample Sales Invoice Template with the score grade of 71.

...(37)...

...(60)...

(From Detail Page - about 64 words) - Since we've already added the handwriting signature image to the printable form, you don't have to add another ActiveX image control in order to use your own signature image. In order to use this sample sales invoice template, what you need to do is to replace our sample signature image with your own image, just like what you'll do with the default logo image.

(From Detail Page - about 38 words) - So, here is the description from Uniform Invoice Software documents that details how to replace the default logo image. Replacing the signature image on the Sample Sales Invoice Template: Using Handwriting Signature form involves exactly the same steps.

(From Detail Page - about 92 words) - (Note that if you have installed the latest version of our invoicing software, Uniform Invoice Software, which is able to upgrade a simple template in Microsoft Excel spreadsheet format into a complete invoicing system, you don't have to replace the logo image manually - you can replace the default logo image by clicking the "Replace Logo Image" button on the ribbon tab in Excel 2007, Excel 2010 and Excel 2013). To replace the default LOGO image in Sample Sales Invoice Template: Using Handwriting Signature with your own image, follow the steps below:

• Right click the Logo image, and then select Properties from the menu.
• Click the Picture property, and then click the "..." button.
• Browse to the folder containing your icon file. Select and open the icon file.
• Close the Properties dialog box.
• Drag the border of the image object to resize it, if needed.

(From Detail Page - about 100 words) - If you don't need the LOGO image and want to delete it, simply hit the DEL key on your keyboard after you selected it with your mouse key. Deleting the LOGO image leaves an empty area to the left of the Company Information section. You may like to move the entire Company Information section to fill in the empty area. To do this: Drag your mouse to select the entire Company Information area, including Company Name, Street Address, City, ST Zip Code, etc.; Push your mouse key on the border of the selected area; drag it to the new location.

(From Detail Page - about 97 words) - If you don't like our way to add/replace images described above, but prefer to copy and paste the image directly into the printable invoice form, one additional step must be taken to make the blank invoice template works with Uniform Invoice Software, that is to name the image / control with "oknWidget_" prefix. Only the images controls with the "oknWidget_" prefix will be included extracted invoices. All the other controls, such as those command buttons on the top of the form, the icon buttons, will be removed if you execute the "Extract/Email" command in Uniform Invoice Software.

(From Detail Page - about 64 words) - Your business is unique, so that you invoices should be. Adding a signature image is a good and easy way to go. This sample invoice template, Sample Sales Invoice Template: Using Handwriting Signature, demonstrates how easy it is to add new images to make your invoice unique. The service version of this template can be found at Sample Service Invoice Template: Using Handwriting Signature.

LEARN MORE PDF

4. Sample Sales Invoice Template: Using Line Number Instead of Item#

"Sample Sales Invoice Template: Using Line Number Instead of Item#" was found to be relative to Sample Sales Invoice Template with the score grade of 44.

(From Detail Page - about 33 words) - This sample invoice template shows automatically the line number of an item in the place of item# or product# on the invoice body. The sample demonstrates the flexibility of an Excel-formatted invoicing template.

(From Detail Page - about 160 words) - Most invoice templates available here on InvoicingTemplate.com have a Product # (or sometimes titled "Product ID" or "Item#") column on the invoice body. If you are using Uniform Invoice Software, our invoicing software and billing software that uses Excel invoice templates as it's front-end, the product# or item# is a required field that is used to uniquely identify a product or an item. With the product# or item# field, Uniform Invoice Software is able to save the description, unit price and all the other related information into database, so that you can retrieve these type of information by entering the product# or item#, without typing the same description, unit price etc. again and again. So in most cases if the product# or item# column is not required to display on the printable invoice form, we move it out of the printable form, instead of delete it. The product# field also helps in generating the product report in Uniform Invoice Software.

(From Detail Page - about 59 words) - But there are situations where you don't need the product# or item# at all. In this Sample Sales Invoice Template: Using Line Number Instead of Item# we'll assign a line number to the product# field automatically using Excel formula. It is a good example on how the default sales invoice template could be customized in the way you like.

(From Detail Page - about 49 words) - This sample invoice template was originally published as a customization sample on office-kit.com at Sample Invoice Template: Using Line# as Product IDs, where you can also find detailed steps on how to create the sample invoice template based on the default sales invoice template shipped with Uniform Invoice Software.

(From Detail Page - about 45 words) - InvoicingTemplate.com categorizes this template as Sales Invoice Template, meaning it includes shipping fields on the form. A service template, where we moved out the shipping fields from the printable invoice form, is also available at Sample Service Invoice Template: Using Line Number Instead of Item#.

LEARN MORE PDF

5. Sales Invoice Template with Discount Amount Column

"Sales Template with Discount Amount Column" was found to be relative to Sample Sales Invoice Template with the score grade of 40.

...(44)...

(From Detail Page - about 117 words) - What if you need to show discounts in a more detailed manner? For example, show discounts applied to each item on invoice body separately? This requires an additional column on the invoice body, as compared to the 5 columns on the default sales invoice template that shipped with the setup program of Uniform Invoice Software. So in this customized sample invoice template - Sales Invoice Template with Discount Amount Column, we have 6 columns on the invoice body within the printable invoice body: Product ID, Description, Quantity, Unit Price, Discount, and Line Total. The "Discount" here is an amount value. We'll publish the percentage version of this sample invoice template here on InvoicingTemplate.com in the near future.

(From Detail Page - about 56 words) - Like all the other sample invoice templates here on Invoicing Templates, Sales Invoice Template with Discount Amount Column is also created from the default sales invoice template shipped with Uniform Invoice Software. In order to create this 6-column invoice layout, we need to adjust the existing 5-column invoice layout to leave space for the additional column.

(From Detail Page - about 258 words) - To adjust the existing columns to leave space for new column or columns that will be added to the printable form for Sales Invoice Template with Discount Amount Column, we first unmerge the item# (or product#), description and quantity columns - these are usually merged columns that each contains several Excel raw columns. To do this, after opening Sales Invoice Template with Discount Amount Column as usual, select all the cells belong to these columns and then click the "Merge and Center" button on the Format toolbar in Excel 2003; in Excel 2003, the "Merge and Center" button can be found on the Home ribbon tab. Drag your mouse to select the Description column (this time, you select Excel raw column since the Description is no longer a merged column) and drag it one column left. Select the "oknProductName_1" cell (the first cell on the moved Description column) and drag your mouse to select the two adjacent cells at the right-hand too - so, you now select 3 cells started with the "oknProductName_1" cell. Now click the Merge and Center command again. This will expand the width of "oknProductName_1" to 3 columns. Do this process for all the other Description cells. Once done, you have one empty column that was left by moving the Description column to the left-hand of this original position. Adjust the columns widths of all the columns to make sure they have the proper widths that are able to hold the content they will display on this Sales Invoice Template with Discount Amount Column.

(From Detail Page - about 45 words) - Please download the Sales Invoice Template with Discount Amount Column for free to see how it differs from the default sales invoice template shipping with Uniform Invoice Software. A PDF version of this Sales Invoice Template with Discount Amount Column is also available for free.

LEARN MORE PDF

6. Sample Service Invoice Template: Using Handwriting Signature

"Service Template with Signature" was found to be relative to Sample Sales Invoice Template with the score grade of 27.

...(28)...

...(128)...

(From Detail Page - about 147 words) - Speaking of dates, we have some off-topic words to talk about. Date values are not as easy as it sounds. Dates seem to cause people problems. Ask five people to enter a date into Excel and you'll get dates entered five different ways. We have created a little and handy utility to address this, an Excel date picker, called Pop-up Excel Calendar. The Excel Date Picker pops up a calendar whenever you click to move into a date cell - i.e. a cell that contains a date value, a date format, or underneath a cell that has the word "date" in it. If you are interesting in this please find more information at Pop-up Excel Calendar, Date Picker for Excel, and at Excel Date Picker, a Pop-up Excel Calendar for Excel. If you use dates frequently our Excel Date Picker could be a nice helper for you.

...(80)...

...(137)...

• In Excel 2003 click the Design Mode button on the Control Toolbox toolbar. Tip: If the Control Toolbox toolbar is invisible, click Excel menu View > Toolbars > Control Toolbox.
• In Excel 2007, Excel 2010 and Excel 2013, click the Design Mode button in the Controls group of the Developer tab.

  (From Detail Page - about 53 words) - TIP: If the Developer tab is not available in Excel 2007, do the following to display it: a) Click Microsoft Office Button, and then click Excel Options; b) In the Popular category, under Top options for working with Excel, select the Show Developer tab in the Ribbon check box, and then click OK.

  (From Detail Page - about 49 words) - Or in Excel 2010 and Excel 2013 to display the Developer tab: a) Click File > Options > Customize Ribbon; b) In the area on the right, ensure that the box next to Developer is checked; c) When you click OK, the Developer tab will appear in the ribbon.

(From Detail Page - about 25 words) - Once you have finished your design work for Sample Service Invoice Template: Using Handwriting Signature, click the Design Mode button again to exit design mode.

(From Detail Page - about 242 words) - Moving a cell or a group of cells is easy in Excel. First, you click to select the cell or drag your mouse to select all the cells you want to move. And then, drag the border of the selected area to move it to the new location where you want to place the cell or cells. The moving content will overwrite the content in the target location, so make sure the target range is empty (not used) in Sample Service Invoice Template: Using Handwriting Signature before doing the movement. And, if the target location contains merged cells, sometimes the movement fails. So it is also helpful to make sure the target location does not contain merged cell. If the target location Sample Service Invoice Template: Using Handwriting Signature is overlapping the original range and the original range contains merged cells, the movement could also fail because you cannot change part of merged cell - if this happens, you need to first move the cells to a temporal location in Sample Service Invoice Template: Using Handwriting Signature that are empty (i.e. not used), unmerge cells, and then move the cells from the temporal location to the desired location. If you need to unmerge a cell, first select it and then click the "Merge and Center" command on the Format toolbar in Excel 2003; or click the "Merge and Center" command on the Home ribbon tab in Excel 2007, 2010 and Excel 2013.

(From Detail Page - about 39 words) - The difference between this Sample Service Invoice Template: Using Handwriting Signature and the default sales invoice template shipped with Uniform Invoice Software is minor, but it provides a good example on using custom images on the printable invoice form.

LEARN MORE PDF

7. Engineering Service Invoice Template

"Engineering Service Billing Form" was found to be relative to Sample Sales Invoice Template with the score grade of 27.

...(58)...

...(118)...

...(110)...

(From Detail Page - about 87 words) - Adding a custom field to the Invoice Body database table makes it possible to save the data on the invoice form to database when the "Save To DB" button is clicked. For example, adding the custom field "Product Type" to the Invoice Body database table allows save the type value on the invoice form, such as "General" or "Labor", to database when you save an invoice by clicking the "Save To DB" button. This feature is not supported in the freeware edition of Engineering Service Invoice Template.

(From Detail Page - about 230 words) - When working with Uniform Invoice Software version of Engineering Service Invoice Template, how does Uniform Invoice Software know to which cell when a field value write to when loading data from the database, and to which field a cell value must save when saving an invoice, a customer or a product item? That is, how does Uniform Invoice Software create the map or relationship between Excel cells on the template Engineering Service Invoice Template and database fields? The answer is by using names. For example, if the field name in the Product table in a database is "ProductType", it is writing to a cell named "oknProductType_?" (where ? is the line number of the invoicing item) when you pick up a product or item on creating an invoice, and when saving an invoice, all cells with the name "oknProductType_?" are saved to the "ProductType" field in the Invoice Body database table. By using cell names, Uniform Invoice Software allows you to move a cell on the form without breaking the feature depending on the field / cell. You can place the "Product Type" column either inside the printable area, which is printed when you issue the Print command in Excel or click the Print command on the Invoice form; or place the Product Type column outside the printable area, which will be included when you print or extract an invoice.

(From Detail Page - about 195 words) - Like other templates available here on InvoicingTemplate.com, the most important job to do on creating this customized invoice template from the default sales invoice template involves moving the cells around to create a new form design. Microsoft Excel provides handy support for this type of jobs. For example, Engineering Service Invoice Template has 3 columns on the invoice body - Description, Reference, and Fee. The Reference is a newly added column defined as custom fields (The definition of this custom field is added to the "Invoice Body" database table, so it becomes a column on the invoice body, but not a single cell on the invoice header or bottom). The "Fee" column, which is manually editable in this invoice template, is actually the Unit Price column on the default sales invoice template. Compared to the default sales invoice template, Engineering Service Invoice Template has the Product#, Quantity, and Line Total columns moved out of the printable invoice form. Unlike those service invoice templates that bill a client based on hourly rate or daily rate, by allowing to manually edit the Fee fields this invoice template becomes more general / generic that suits more business situations.

...(233)...

...(30)...

(From Detail Page - about 58 words) - Engineering Service Invoice Template also includes space for you to add a handwriting signature image on the bottom of the invoice template. Like the default LOGO image placed on the heading of the invoice form, if you need to keep the signature image in the extracted copy of your invoice, the image should be named with "oknWidget_" prefix.

(From Detail Page - about 86 words) - Naming a control or an image is easy in Microsoft Excel. First make sure your template Engineering Service Invoice Template is in design mode. Right-click the control or image you want to assign it a name, choose Properties. On the Properties box, enter the name into the "name" field and press enter. Note that if you have several controls that you want to assign different names, you can do so by entering the name and then clicking to choose another control without closing the Properties window.

LEARN MORE PDF

8. Invoice Template with Long Product Description

"Invoice Template with Long Product Description" was found to be relative to Sample Sales Invoice Template with the score grade of 13.

...(23)...

...(65)...

• In Excel 2003 click the Design Mode button on the Control Toolbox toolbar. Tip: If the Control Toolbox toolbar is invisible, click Excel menu View > Toolbars > Control Toolbox.
• In Excel 2007, Excel 2010 and Excel 2013, click the Design Mode button in the Controls group of the Developer tab.

  (From Detail Page - about 53 words) - TIP: If the Developer tab is not available in Excel 2007, do the following to display it: a) Click Microsoft Office Button, and then click Excel Options; b) In the Popular category, under Top options for working with Excel, select the Show Developer tab in the Ribbon check box, and then click OK.

  (From Detail Page - about 49 words) - Or in Excel 2010 and Excel 2013 to display the Developer tab: a) Click File > Options > Customize Ribbon; b) In the area on the right, ensure that the box next to Developer is checked; c) When you click OK, the Developer tab will appear in the ribbon.

(From Detail Page - about 24 words) - Once you have finished your design work for Invoice Template with Long Product Description, click the Design Mode button again to exit design mode.

(From Detail Page - about 239 words) - Moving a cell or a group of cells is easy in Excel. First, you click to select the cell or drag your mouse to select all the cells you want to move. And then, drag the border of the selected area to move it to the new location where you want to place the cell or cells. The moving content will overwrite the content in the target location, so make sure the target range is empty (not used) in Invoice Template with Long Product Description before doing the movement. And, if the target location contains merged cells, sometimes the movement fails. So it is also helpful to make sure the target location does not contain merged cell. If the target location Invoice Template with Long Product Description is overlapping the original range and the original range contains merged cells, the movement could also fail because you cannot change part of merged cell - if this happens, you need to first move the cells to a temporal location in Invoice Template with Long Product Description that are empty (i.e. not used), unmerge cells, and then move the cells from the temporal location to the desired location. If you need to unmerge a cell, first select it and then click the "Merge and Center" command on the Format toolbar in Excel 2003; or click the "Merge and Center" command on the Home ribbon tab in Excel 2007, 2010 and Excel 2013.

...(31)...

(From Detail Page - about 109 words) - To adjust the width of one column for Invoice Template with Long Product Description, drag the boundary on the right side of the column heading until the column is the width that you want. To change the width of multiple columns for Invoice Template with Long Product Description, select the columns that you want to change, and then drag a boundary to the right of a selected column heading. To change the width of columns to fit the contents for Invoice Template with Long Product Description, select the column or columns that you want to change, and then double-click the boundary to the right of a selected column heading.

(From Detail Page - about 58 words) - The flexibility of Microsoft Excel makes creating this customized Invoice Template with Long Product Description easy and quick. Don't forget to protect the Invoice worksheet and exit design mode once the design work is finished. If you find this invoice template interesting, download and try its free format, Uniform Invoice Software format or PDF format per your requirements.

LEARN MORE PDF

9. Simple 2-Column Sales Invoice Template

"Simple 2-Column Sales Invoice Form" was found to be relative to Sample Sales Invoice Template with the score grade of 9.

(From Detail Page - about 32 words) - Simple 2-Column Sales Invoice Template is a sample of customizing the default sales invoice template shipped with Uniform Invoice Software. It has two columns, Description and Amount, on the printable invoice body.

(From Detail Page - about 63 words) - This general simple invoice template does not contains the section for shipping address fields, assuming shipping address are the same as the "bill to" address. However, "Ship Date", "Ship Method", and the field for you to enter shipping cost are still left on the invoice form, that's why we at InvoicingTemplate.com categorize it as sales invoice template, but not a service invoice template.

...(16)...

...(95)...

(From Detail Page - about 164 words) - If you use the Uniform Invoice Software version of Simple 2-Column Sales Invoice Template, there are additional taxing options on the Taxes tab of the Settings window. The first is the option for choosing the number of tax items; you have 3 choices - no tax, one tax and two taxes. Secondly, you can set the names and rates in percentage for each tax, such as VAT, GST or PST, or simply Sales Tax. Thirdly, there are a group of checkbox options on the dialog box, including: "Tax invoice total including shipping cost", which adds the shipping cost to the taxable amount when checked; "Tax 2 is applied to tax 1", which adds the amount of "tax 1" to the taxable amount if checked; and "tax rate can be zero", which allows you to set any of the tax rates to be the value of zero. If you modify the options on this dialog box, the invoice form will be changed accordingly if needed.

(From Detail Page - about 33 words) - The invoice template has our logo placeholder image on it, which you should replace with your own logo image. To do this, simple unprotect the Invoice worksheet, and then switch to design mode.

...(63)...

(From Detail Page - about 135 words) - In design mode, Microsoft Excel allows you to move, add, or delete controls or images inside Simple 2-Column Sales Invoice Template. Note that if you have our invoicing program (Uniform Invoice Software) installed, and you are running Excel 2007, Excel 2010 and Excel 2013, it already provides a Design Mode button on the ribbon tab, so that you don't have to switch to design mode manually. Our invoicing software is able to turn a simple spreadsheet into a powerful invoicing system, with the ability to manage customers, products invoices and payments, it also includes various tools that could help you configure the layout of your form, such as the number of taxes and tax names and rates. If you don't have our invoicing program installed, here are how you can switch to design mode manually.

...(153)...

(From Detail Page - about 23 words) - Once you have finished your design work for Simple 2-Column Sales Invoice Template, click the Design Mode button again to exit design mode.

(From Detail Page - about 90 words) - (Note that if you have installed the latest version of our invoicing software, Uniform Invoice Software, which is able to upgrade a simple template in Microsoft Excel spreadsheet format into a complete invoicing system, you don't have to replace the logo image manually - you can replace the default logo image by clicking the "Replace Logo Image" button on the ribbon tab in Excel 2007, Excel 2010 and Excel 2013). To replace the default LOGO image in Simple 2-Column Sales Invoice Template with your own image, follow the steps below:

...(53)...

(From Detail Page - about 100 words) - If you don't need the LOGO image and want to delete it, simply hit the DEL key on your keyboard after you selected it with your mouse key. Deleting the LOGO image leaves an empty area to the left of the Company Information section. You may like to move the entire Company Information section to fill in the empty area. To do this: Drag your mouse to select the entire Company Information area, including Company Name, Street Address, City, ST Zip Code, etc.; Push your mouse key on the border of the selected area; drag it to the new location.

(From Detail Page - about 54 words) - Feel free to download and try Uniform Invoice Software along with this simple 2-column sales invoice template. Installing Uniform Invoice Software, our Excel Invoice Software, will also install the help documents for the invoicing program, which includes detailed instruction on how to customize the invoice template such like this simple 2-column sales invoice template.

LEARN MORE PDF

10. Sample Service Invoice Template: Fixed Items

"Sample Service Invoice Template: Fixed Items" was found to be relative to Sample Sales Invoice Template with the score grade of 4.

...(25)...

(From Detail Page - about 38 words) - The only difference between this customized template and the original invoice template is that there are no shipping fields in the service invoice template, whereas the sales invoice template has shipping fields defined near the "Bill To" section.

...(109)...

(From Detail Page - about 16 words) - This service edition is created by moving all the shipping fields out of the printable form.

(From Detail Page - about 239 words) - Moving a cell or a group of cells is easy in Excel. First, you click to select the cell or drag your mouse to select all the cells you want to move. And then, drag the border of the selected area to move it to the new location where you want to place the cell or cells. The moving content will overwrite the content in the target location, so make sure the target range is empty (not used) in Sample Service Invoice Template: Fixed Items before doing the movement. And, if the target location contains merged cells, sometimes the movement fails. So it is also helpful to make sure the target location does not contain merged cell. If the target location Sample Service Invoice Template: Fixed Items is overlapping the original range and the original range contains merged cells, the movement could also fail because you cannot change part of merged cell - if this happens, you need to first move the cells to a temporal location in Sample Service Invoice Template: Fixed Items that are empty (i.e. not used), unmerge cells, and then move the cells from the temporal location to the desired location. If you need to unmerge a cell, first select it and then click the "Merge and Center" command on the Format toolbar in Excel 2003; or click the "Merge and Center" command on the Home ribbon tab in Excel 2007, 2010 and Excel 2013.

(From Detail Page - about 95 words) - The two standalone fields, "Ship Date" and "Ship Via", are also moved out of the printable invoice form (Although "Shipping Cost" is left on the bottom of the form). The two adjacent fields, "Terms" and "Due Date", are expanded to fill in the space left by moving out the shipping fields. To do this, we first move "Terms" (both the label and field cell) two columns left, and move "Due Date" one column left, and then select the "Terms" label and its subsequent empty cell, and then click "Merge and Center" command on Excel ribbon.

...(119)...

(From Detail Page - about 35 words) - So with several easy steps we have the Sample Service Invoice Template: Fixed Items. As detailed at the sales edition Sample Sales Invoice Template: Fixed Items, fixed items could be very helpful for some businesses.

LEARN MORE PDF