Medical Billing Form In Ms Excel Spreadsheet Format

1. Simple Sample - Adding Discount Column

"Simple Sample - Adding Discount Column" was found to be relative to Medical Billing Form In Ms Excel Spreadsheet Format with the score grade of 81.

(From Detail Page - about 39 words) - To give customers detailed discount information for each sales / service item on their bills and invoices, you need a "Discount" column on the invoice layout. This template demonstrates how to add the column to an existing invoice format.

(From Detail Page - about 84 words) - By adding the "Discount" column, we meant not only re-design the Excel spreadsheet form so that it has an additional column, by also make the newly added column work with Uniform Invoice Software -- i.e. when you click the "Save Invoice" button, the content on the "Discount" column should also be saved along with each invoicing item; if "Clear & New" command is clicked, the "Discount" column should get cleared too. This is implemented by using custom fields (user-defined fields) in Uniform Invoice Software.

(From Detail Page - about 107 words) - We've already released several templates here on InvoicingTemplate.com that are focused on discounting. For example, this tutorial is based on the result template built in Simple Invoice Template - Discount Amount Field that demonstrates how to add a discount amount field to the bottom of the billing form. And, there are also bill / receipt designs that offer discount column, such as Sales Invoice Template with Discount Amount Column and Sales Invoice Template with Discount Percentage Column. There are also samples on uniformsoft.com, at Template with Discount Amount Column, and on office-kit.com, at Invoice Template with Discount Column. All these templates works with Uniform Invoice Software well.

(From Detail Page - about 64 words) - This tutorial differs from others in that it focus on the steps that we followed to add the "Discount" column. The basic template that we used as the origin and starting point of this tutorial already has a "Discount" field added, which is a manually fillable custom field. After adding the "Discount" column, we'll also use Excel formula for automated calculation of discount amount.

(From Detail Page - about 11 words) - Let's see how to add the new column, step by step.

1. First, back up the Excel invoice template and database file. In this sample, we'll need to modify the database, so creating a backup of the database is necessary.
2. Open the template.
3. Push down the "Design Mode" button on the "Invoice" ribbon tab.
4. This is not a required step - but you may like to try it. Go to Excel "Page Layout" tab. In the "Themes" group, click to open the "Colors" list, choose "Blue".

   (From Detail Page - about 39 words) - As you can see, the whole invoice form now has a new color theme now. Like the themes feature in Microsoft Word, this is the quick and best (easy) way to change the look & feel of the form.

5. Drag your mouse to select all cells on the "Description" column, including the heading, ranging from $D$21 to $D$33. Click the "Merge and Center" button on Excel "Home" ribbon tab. This unmerges all the cells on the "Description" column.
6. Drag your mouse to select all the cells on the "Quantity" column, including the heading, ranging from $I$21 to $I$33. Push the mouse key on the border of the selected area. Without releasing the mouse key, move the entire selected area on column left (Destination: $H$21:$H$33).
7. Now select the entire "Unit Price" column, including the heading. Drag the select area one column left. The new location of the "Unit Price" column is now $I$21:$I$33.
8. With the new "Unit Price" column still selected, click the "Format Painter" button on Excel "Home" ribbon tab.
9. Click the first empty cell left by moving out the "Unit Price" column, i.e. $J$21. This applies the format of the "Unit Price" column to the empty column.
10. Drag your mouse to select all the cells on the empty column, except the heading cell, ranging from $J$22 to $J$33. Right-click one of the selected cell, choose "Format Cells" from the shortcut menu. On the "Format Cells" dialog box, go to the "Protection" tab, make sure the "Locked" property is cleared. Click OK to close the dialog box. This makes sure that the "Discount" column is manually fillable when the sheet is protected.
11. Click to select heading cell of the empty column, i.e. $J$21. Enter the column heading text "Discount".
12. Name the following empty cells. The names should be "oknItemDiscount_1" ($J$22), "oknItemDiscount_2" ($J$23), "oknItemDiscount_3" ($J$24) ... "oknItemDiscount_12" ($J$33).
13. Drag your mouse to select all the cells on the "Description" heading, ranging from $D$21 to $G$21. Click "Merge and Center" on Excel "Home" ribbon tab.
14. Repeat the above step for each line of the "Description" field. For example, select $D$22:$G$22, click "Merge and Center"; select "$D$23:$G$23", click "Merge and Center", and so on. If you are very familiar with Microsoft Excel, you can also use "Format Painter" to speed up the processing of merging.
15. Select all the "Description" cells, ranging from $D$22 to $G$33. Click "Align Left" icon button in the "Alignment" group on Excel "Home" ribbon.

    (From Detail Page - about 54 words) - Click to select the "Discount (Amount)" cell, $K$35. Enter a formula for this cell, "=sum (J22:J33)". Right-click the same cell $K$35 again, and choose "Format Cells" from the dialog box. Go to the "Protection" tab, checked the "Locked" property. This makes sure that the cell is not manually fillable once the sheet is protected.

16. Now we need to create the definition of the custom field "ItemDiscount" in the database. To do this, we need to use the "Custom Field Manager" provided by Uniform Invoice Software. In order to use this tool, we have to first exit design mode by clicking the "Design Mode" button again on the "Invoice" ribbon.
17. Click "Invoices" on the ribbon.
18. Click "Custom Fields".
19. From the "Database table" list, choose "Invoice Body".
20. Click "Add Field".
21. Enter the field definition as follows - Name: ItemDiscount; Type: Decimal; Precision: 10; Scale: 2.

    (From Detail Page - about 60 words) - The map between an Excel cell and a database field is established by using names. For the invoice body section, all "oknItemDiscount_*" fields are mapped to the "ItemDiscount" field defined in the "Invoice Body" database table. That is, a cell should be named with "okn + Database Field Name", where we call "okn" is a prefix of the cell name.

22. Save the template by clicking the "Save" button on Excel quick access toolbar.
23. Now you can test the template to see if it works in the way met our plan.

LEARN MORE PDF

2. Plumbing Service Invoice Template (Landscape)

"Plumbing Service Invoice Template (Landscape)" was found to be relative to Medical Billing Form In Ms Excel Spreadsheet Format with the score grade of 72.

(From Detail Page - about 49 words) - Plumbing Service Billing Template (Landscape), as the name implies, is a customization sample of Plumbing Service Billing Template (Sales Tax) (c4022). This sample invoice layout changed the original paper orientation to Landscape. It contains less lines on the detail section, but each line is able to hold more text.

(From Detail Page - about 103 words) - Plumbing Service Billing Template (Landscape) includes exactly the same number of fields as the original version. Unlike the other 2-column invoice templates, Plumbing Contractor Invoice Template (c2008) and Plumbing Contractor Invoice Template (Landscape) (c2009), this plumber invoice template defines sales tax, instead of VAT tax. Like Plumbing Service Invoice Template (Sales Tax) (c4022), this service invoice template for plumber also has the Taxable column moved into the printable invoice form. This layout design is suitable for those businesses who have both taxable and non-taxable items. Bill your customers with this plumbing invoice template if you have relatively long description for your invoicing items.

(From Detail Page - about 104 words) - Checkboxes can not only be used as in a column value, but also could be on the invoice header and invoice bottom. For another example of using checkboxes, refer to Medical Invoice Template (1) and Medical Invoice Template (2). One thing to note for the Uniform Invoice Software version is that, if you extract an invoice, the taxable checkboxes will be kept on the extracted version. This is implemented by naming the checkboxes with "oknWidget_" prefix. All the other objects that don't have "oknWidget_" prefix in their names, like the command buttons on the plumbing service invoice form, will be deleted when being extracted.

(From Detail Page - about 35 words) - Please go to the download page to download the Plumbing Service Invoice Template (Landscape) in the format you like. If you are interested in the implementation details of Plumbing Service Billing Template (Landscape), read on.

(From Detail Page - about 100 words) - While the free version of Plumbing Service Invoice Template (Landscape) is simple, the result invoice created by using this template is as beautiful and professional as many commercial invoicing software program, or even better. It is an ideal tool for small businesses and freelances who offer services and don't need a shipping section on their invoicing form. It is a good service invoice creator, but if you need more features, like management of customers, products / service items, invoices and payments, just install Uniform Invoice Software to make all the buttons on Plumbing Service Invoice Template (Landscape) work for you.

LEARN MORE PDF

3. Psychologist Invoice Template

"Psychologist Invoice Template" was found to be relative to Medical Billing Form In Ms Excel Spreadsheet Format with the score grade of 62.

(From Detail Page - about 29 words) - This free invoice template designed for psychological services features a "Bill To" section, a separate "Patient" section, and 6 columns - "Date", "Service", "Charges", "Payments", "Insurance Payments", "Current Balance".

(From Detail Page - about 101 words) - If you are a Psychologist, whether Clinical or counseling, this template will work for you. It is designed as a progressive work / job and payment statement. With this understanding, Psychologist Billing Format is also suitable for creating statements and bills for other business types with small modifications, such as large projects that should be done and get paid in several phases; cleaning service or lawn care service that should be done regularly, or freelance service rendered in multiple times - in these cases, the "Patient" section could be replaced with something like "Project Description", "Job Description" or "Service Description" etc.

...(128)...

...(206)...

(From Detail Page - about 86 words) - Adding a custom field to the Invoice Body database table makes it possible to save the data on the invoice form to database when the "Save To DB" button is clicked. For example, adding the custom field "Product Type" to the Invoice Body database table allows save the type value on the invoice form, such as "General" or "Labor", to database when you save an invoice by clicking the "Save To DB" button. This feature is not supported in the freeware edition of Psychologist Invoice Template.

(From Detail Page - about 246 words) - To adjust the existing columns to leave space for new column or columns that will be added to the printable form for Psychologist Invoice Template, we first unmerge the item# (or product#), description and quantity columns - these are usually merged columns that each contains several Excel raw columns. To do this, after opening Psychologist Invoice Template as usual, select all the cells belong to these columns and then click the "Merge and Center" button on the Format toolbar in Excel 2003; in Excel 2003, the "Merge and Center" button can be found on the Home ribbon tab. Drag your mouse to select the Description column (this time, you select Excel raw column since the Description is no longer a merged column) and drag it one column left. Select the "oknProductName_1" cell (the first cell on the moved Description column) and drag your mouse to select the two adjacent cells at the right-hand too - so, you now select 3 cells started with the "oknProductName_1" cell. Now click the Merge and Center command again. This will expand the width of "oknProductName_1" to 3 columns. Do this process for all the other Description cells. Once done, you have one empty column that was left by moving the Description column to the left-hand of this original position. Adjust the columns widths of all the columns to make sure they have the proper widths that are able to hold the content they will display on this Psychologist Invoice Template.

(From Detail Page - about 105 words) - Counseling and clinical psychologists often perform similar work as researchers and/or practitioners and may work side by side in any number of settings, including academic institutions, hospitals, community mental health centers, independent practice, and college counseling centers, where they may have overlapping roles and functions. Today, the differences between psychologists from each specialty are more nuanced, and there are perhaps more similarities than differences among individual psychologists from each field. No matter what job you are doing, this template might work for you. Or if you prefer to visit more invoice templates here on InvoicingTemplate.com, visit Free Medical Invoice Template (1), or Medical Billing Format.

LEARN MORE PDF

4. Simple Sample - Customer Name on Product Report

"Simple Invoicing Sample - Customer Name on Product Report" was found to be relative to Medical Billing Form In Ms Excel Spreadsheet Format with the score grade of 44.

(From Detail Page - about 39 words) - The default product report contains fields defined in the "Invoice Body" database table. This simple invoice template sample demonstrates how to add fields in the "Customer" or "Invoice Header" database tables to the "Product" report by using custom fields.

(From Detail Page - about 138 words) - Uniform Invoice Software support custom fields or user-defined fields, which is a unique feature that allows you to add new fields to the backend database as well as to the invoice form. Simple Sample - Customer Name on Product Report uses custom fields to implement the features that are not available in the default sales invoice template. With the support for custom fields in the database, Uniform Invoice Software has the ability to manipulate the newly added fields in database, includes adding them to reports. With the support for custom fields in the Excel worksheet, Uniform Invoice Software has the ability to create the relationship between fields - for example, one field should be the sum of the other fields, or the value of one field should be calculated only when another field value equals a certain value.

...(114)...

(From Detail Page - about 76 words) - In this sample, we'll take the result template built in c4051 Simple Invoice Template - Discount Amount Field as a starting point, create two custom fields, "CustomerName" and "CustomerContact" in the invoice body database table, and then add them to the product report. Note that in order to follow this tutorial, you should have Uniform Invoice Software installed, which is our invoicing software app for automated invoice processing. Download the fully functional trial version for free.

...(627)...

(From Detail Page - about 49 words) - The definition of the database structure in Uniform Invoice Software established the "one-to-many" relationship between the "Invoice Header" (i.e. "InvIndr") and "Invoice Body" (i.e. "InvBdy") database tables. This means that, for each record in the invoice header database table, there might be one or many items belong to it.

(From Detail Page - about 76 words) - On the other hand, the main content of the "Product" report is retrieved from the invoice body database table, adding the fields of the invoice header table to the invoice body table will create many redundant data, as they must be repeated for each item. One exception though - the definition of invoice body items must include the invoice# (InvoiceID) field, since it is the primary key of the invoice header table that identifies each uniquely.

(From Detail Page - about 117 words) - However there are still situations where you prefer to know which customer purchased what product. For example, if you are service provider you may want to know what service offered to what customer from the product report. If you are selling products, the advantages of adding customer information to the product report is that you will be able to easy find where (or to whom) the products were sold to. It is common for attorney / legal, medical, catering, restaurant, law firms (whether small or big), health insurance billing or statement / timesheet, car / vehicle sales, graphic designs, freelance, plumbing, marketing, business plans, accounting, house rent (yearly or monthly), or even home businesses for monthly bill.

LEARN MORE PDF

5. Simple Tax Invoice Sample with Tax Rate List

"Simple Tax Invoicing Sample - Tax Rate List" was found to be relative to Medical Billing Form In Ms Excel Spreadsheet Format with the score grade of 43.

(From Detail Page - about 43 words) - If your business is selling to several states or countries, you may need to change the tax rates from invoice to invoice depending on shipping destination. This sample shows you how to implement a drop list to simplify the selection of tax rate.

(From Detail Page - about 55 words) - With a drop down list, you select values from a list, instead of typing in manually. This is a great way to prevent typo errors. With the default sales invoice template shipping with Uniform Invoice Software, the tax rate is fillable when you create an invoice; but it is not implemented as a dropdown list.

...(81)...

...(56)...

(From Detail Page - about 85 words) - For a template support mixed tax rates on one same billing form / receipt format (for example, beverage tax must be at 3.0% and non-beverage tax rate must be at 5.0%; or if you are selling both general products (goods) and labor (service) to customers, which are two types of taxable items and should be charged with different tax rate), visit Mixed Tax Rates in an Invoice If you need to detail the tax amount for each invoicing item, try Invoice Template with Tax Column.

(From Detail Page - about 61 words) - The base template supports two taxes on the bottom of the form (The default tax names are set to PST - Provincial sales tax, and GST - stands for Goods and Services Tax. It is a federal sales tax, although you can easily change this via the Settings dialog box). For the purpose of this demonstration, we'll use only one tax.

...(11)...

...(814)...

(From Detail Page - about 127 words) - With this solution, Uniform Invoice Software does not save the tax rate table to database along with each invoice. This means that, if you 1) - Save an invoice which sells products to a state, say Iowa; 2) - Several months later, you update the tax rate of Iowa; 3) - You reload the invoice using the Excel billing form; 4) - You save the invoice again (the default implementation of Uniform Invoice Software does not allow to save paid invoice, but we do have hacks / workarounds for this is a customer asked). In this situation, the bill that is re-calculated with the new rate table will differ from the original invoice. To overcome this, you need to save the entire rate table using custom fields.

(From Detail Page - about 126 words) - A sales tax is a tax paid to a governing body for the sales of certain goods and services. Usually laws allow (or require) the seller to collect funds for the tax from the consumer at the point of purchase. Besides state tax, you may also need to consider local sales tax. For example, Texas imposes a state sales tax on all retail sales, leases and rentals of most goods, as well as taxable services. Texas cities, counties, transit authorities and special purpose districts have the option of imposing an additional local sales tax for a combined state and local tax rate of up to 8 1/4% (.0825). Taxation itself is a complex topic. If your business is located in Australia, try Australian GST Invoice Template.

LEARN MORE PDF

6. Medical Invoice Template (1)

"Medical Billing Form (1)" was found to be relative to Medical Billing Form In Ms Excel Spreadsheet Format with the score grade of 43.

(From Detail Page - about 32 words) - Medical Invoice Template is a medical records invoice template that offers a free blank medical invoice form and helps you create hospital bill and medical invoice with an intuitive medical bill format.

(From Detail Page - about 70 words) - This free medical invoice form provided to you by InvoicingTemplate.com is in Microsoft Excel format. Even if you are looking for a medical invoice template in Word format, or other medical office invoice templates, InvoicingTemplate.com recommends you to consider our Excel-format medical invoice template too. Microsoft Excel is Microsoft's best spreadsheet tool for formatting and calculating client-side data, which makes it the ideal platform for a medical billing invoice template.

(From Detail Page - about 57 words) - InvoicingTemplate.com offers this medical invoice template in two editions - one free medical invoice template, and another edition that should work with Uniform Invoice Software. Uniform Invoice Software, originally named Excel Invoice Manager, is our billing software and invoicing software that has the ability to make a simple Excel medical invoice template become powerful medical billing software.

(From Detail Page - about 149 words) - This free medical invoice template is the first of our serial of medical invoice templates. Originally provided on UniformSoft.com at Medical Invoice Template, this medical invoice template was designed for those hospitals and health care providers who offer medical care for infants, children and adolescents. The other medical invoice templates on this serial will offer more variants and formats for you. While the term "medical invoice" is as bare bones as a name can get, medical invoices can actually be a source of confusion if not designed to provide information in a clear and organized manner. A medical invoice can be used at any health care service and assists the health care service provider to maintain health care records of patients. It is used to bill the patient and contains detailed information on the type of treatment or medical service provided to the patients at their time of hospitalization.

...(198)...

(From Detail Page - about 124 words) - If you use the Uniform Invoice Software edition of this Medical Invoice Template, note that an invoice is marked as "paid" if the "Balance Due" cell is zero. By default, a paid invoice is not editable. Contact us for a hidden option if you need to be able to edit paid invoice. This medical invoice template also implements a new feature, that if you fill in the "card holder name", the invoice will be paid. For this reason, if you run the Statement report, the "payment total" calculation will not work. We recommend you to remove this part from your statement report. This is because the invoice template allows you to enter payment information on the invoice form; there are no separate payment records.

(From Detail Page - about 34 words) - Since this medical invoice template is designed in Microsoft Excel format, customizing the layout is easy and simple, as it will be shown in the other medical invoice templates in this serials of templates.

LEARN MORE PDF

7. Advance Payment Invoicing Format

"Advance Payment Billing Format" was found to be relative to Medical Billing Form In Ms Excel Spreadsheet Format with the score grade of 31.

...(36)...

...(57)...

(From Detail Page - about 87 words) - This template, Advance Payment Invoicing Format, differs from the original design in that it adds two new cells, "Advance Payment %" and "Advance Payment Amount" to the bottom of the invoice spreadsheet. The first cell "Advance Payment %" is a manually editable cell (that is, it is unlocked), where you enter the percentage of the advance payment. The second cell, "Advance Payment Amount" is calculated automatically based on the total payable and advance payment percentage. The advance payment amount is then deducted from the invoice balance due.

(From Detail Page - about 13 words) - Both "Advance Payment %" and "Advance Payment Amount" are implemented as custom fields.

(From Detail Page - about 134 words) - Uniform Invoice Software support custom fields or user-defined fields, which is a unique feature that allows you to add new fields to the backend database as well as to the invoice form. Advance Payment Invoicing Format uses custom fields to implement the features that are not available in the default sales invoice template. With the support for custom fields in the database, Uniform Invoice Software has the ability to manipulate the newly added fields in database, includes adding them to reports. With the support for custom fields in the Excel worksheet, Uniform Invoice Software has the ability to create the relationship between fields - for example, one field should be the sum of the other fields, or the value of one field should be calculated only when another field value equals a certain value.

...(110)...

...(71)...

(From Detail Page - about 106 words) - The design of Advance Payment Billing Format also takes advantages of Excel formulas. By using Excel formulas, we are able to create the relationship between Excel cells that are mapped to database fields in Uniform Invoice Software. This gives Uniform Invoice Software unusual flexibility that supports not only simple and regular invoicing and billing forms, but also complex layouts and formats that are required in many business practices. With the Excel-formatted spreadsheet forms, we are able to design invoices that are beautiful and professional. With the database connected via Uniform Invoice Software, your invoicing system will be able to manage customers, products, invoices and payments easily.

(From Detail Page - about 86 words) - For example, the invoice template at Sample Sales Invoice Template: Fixed Items locks the first item on the detail section of the printable invoicing form. Which means that, the first line (the description) will not be changed from invoice to invoice. In fact, all template here on InvoicingTemplate.com are created based on the default sales invoice template shipped with Uniform Invoice Software. Please refer to the "Customizing Invoice Template" chapter of Uniform Invoice Software help file for more information on how to customize our invoice templates.

LEARN MORE PDF

8. Contractor Billing Format

"Contractor Invoicing Layout" was found to be relative to Medical Billing Form In Ms Excel Spreadsheet Format with the score grade of 27.

(From Detail Page - about 37 words) - Contractor Billing Format differs from other templates here in that it itemizes "service" and "expense" in two separate sections on the invoice detail section. Each section has a different tax (including tax name and tax rate) applied.

(From Detail Page - about 81 words) - Take a look at the screenshot of this invoice template, you'll easily find the differences between this template and other templates available here on InvoicingTemplate.com. There are 18 lines on the detail section, but these lines are grouped into two sections 鈥?the "Services" section and the "Expenses" section, with each section identified by a blue title bar. You can use 6 lines on each section to itemize the service and expense. The other lines are reserved for taxes and amounts.

(From Detail Page - about 123 words) - To make this template work with Uniform Invoice Software, Contractor Billing Format adopts tricks. First, the most left column on the visible (and printable) area was a custom field "ItemLine", which was continuously named from "oknItemLine_1" to "oknItemLine_18", to tell Uniform Invoice Software that there are 18 lines on the invoice detail section. The other columns, such as "DATE", "DETAILS" and "AMOUNT", has an interruption in their name serials. For example, "oknItemDate_1" to "oknItemDate_6" are put onto same column, "oknItemDate_7" to "oknItemDate_12" are put onto another column outside the printable area, and "oknItemDate_13" to "oknItemDate_18" are put onto the same column as "oknItemDate_1" to "oknItemDate_6". This is necessary because the space for "oknItemDate_7" to "oknItemDate_12" is used by the tax and amount cells.

(From Detail Page - about 74 words) - This template has two taxes like the default template shipped with Uniform Invoice Software. However unlike the default template, where the two taxes applied to all taxable items added to the invoice detail section, Contractor Billing Format applies each tax to one section. In this implementation, "Tax 1" was applied to the "Service" section, and "Tax 2" was applied to the "Expense" section. All the tax-calculation formulas are modified according to this design requirement.

(From Detail Page - about 51 words) - In this Contractor Invoicing Layout, we use the "Bill To" found on the original invoice template for "Contractor", including name, Address, City State and ZIP, Phone, Email and Contractor#; and, we use the "Shipping To" section for "Client", including its Name, Address, City State and ZIP, as well as contact information.

(From Detail Page - about 36 words) - The two custom fields added to this template, "Service Amount" and "Expense Amount", calculate the sum amount of each section. These two fields are also added to the "Sales Report", with the name "oknRsServiceAmount" and "oknRsExpenseAmount".

...(112)...

(From Detail Page - about 96 words) - While the free version of Contractor Billing Format is simple, the result invoice created by using this template is as beautiful and professional as many commercial invoicing software program, or even better. It is an ideal tool for small businesses and freelances who offer services and don't need a shipping section on their invoicing form. It is a good service invoice creator, but if you need more features, like management of customers, products / service items, invoices and payments, just install Uniform Invoice Software to make all the buttons on Contractor Billing Format work for you.

LEARN MORE PDF

9. Netherland Service Invoice Template 2

"Netherland Service Invoice Template 2" was found to be relative to Medical Billing Form In Ms Excel Spreadsheet Format with the score grade of 15.

(From Detail Page - about 40 words) - Netherland Service Invoice Template 2 is created from c5050 Netherland Sales Billing Form 2. It differs from the original sales invoice template in that it does not include the shipping address section and thus is suitable for those service businesses.

(From Detail Page - about 71 words) - Just like the original version, this service invoice template (Netherland Service Invoice Template 2) also has the VatID custom field defined in both the Customer and Invoice Header database tables. On the invoicing form, this field is named oknVatID. Note that this field should be unprotected in order to be manually editable when the invoicing form is protected. To unlock a cell / field, you should firstly unprotect the Invoice worksheet.

(From Detail Page - about 63 words) - The protection of the Invoice worksheet in Netherland Service Invoice Template 2 prevents accidental modifications to layouts and formulas. If you have Uniform Invoice Software installed, it could even display a warning message when you close a template without protecting the invoice worksheet. However for the purpose of this sample, we should firstly unprotect the Invoice worksheet in Netherland Service Invoice Template 2.

...(127)...

...(51)...

(From Detail Page - about 135 words) - In design mode, Microsoft Excel allows you to move, add, or delete controls or images inside Netherland Service Invoice Template 2. Note that if you have our invoicing program (Uniform Invoice Software) installed, and you are running Excel 2007, Excel 2010 and Excel 2013, it already provides a Design Mode button on the ribbon tab, so that you don't have to switch to design mode manually. Our invoicing software is able to turn a simple spreadsheet into a powerful invoicing system, with the ability to manage customers, products invoices and payments, it also includes various tools that could help you configure the layout of your form, such as the number of taxes and tax names and rates. If you don't have our invoicing program installed, here are how you can switch to design mode manually.

• In Excel 2003 click the Design Mode button on the Control Toolbox toolbar. Tip: If the Control Toolbox toolbar is invisible, click Excel menu View > Toolbars > Control Toolbox.
• In Excel 2007, Excel 2010 and Excel 2013, click the Design Mode button in the Controls group of the Developer tab.

  (From Detail Page - about 53 words) - TIP: If the Developer tab is not available in Excel 2007, do the following to display it: a) Click Microsoft Office Button, and then click Excel Options; b) In the Popular category, under Top options for working with Excel, select the Show Developer tab in the Ribbon check box, and then click OK.

  (From Detail Page - about 49 words) - Or in Excel 2010 and Excel 2013 to display the Developer tab: a) Click File > Options > Customize Ribbon; b) In the area on the right, ensure that the box next to Developer is checked; c) When you click OK, the Developer tab will appear in the ribbon.

(From Detail Page - about 23 words) - Once you have finished your design work for Netherland Service Invoice Template 2, click the Design Mode button again to exit design mode.

(From Detail Page - about 67 words) - You may notice that we are using a similar color schema on many invoice template here on InvoicingTemplate.com. If you are familiar with Microsoft Excel, you may already know that it is fairly easy to change the color of one or more cells. To quickly change the color schema of the invoice form, you can even change the color palette. Here is how you can do it.

...(84)...

(From Detail Page - about 48 words) - This invoice template uses Excel formulas to translate the address format, as detailed on office-kit.com at Invoice Template for Holland Clothing (Wear) Company or Shop. The office-kit.com version is also available here on InvoicingTemplate.com at Netherland Sales Invoice Template, and its service edition at Netherland Service Invoicing Template.

LEARN MORE PDF

10. Service Proposal and Quote

"Service Proposal and Quote" was found to be relative to Medical Billing Form In Ms Excel Spreadsheet Format with the score grade of 8.

(From Detail Page - about 35 words) - The proposal and quote template contains a selectable column implemented as a group of check boxes, which make it possible to select or deselect service items to see the amount of different combinations service items.

(From Detail Page - about 97 words) - Since this template is service-orient, the shipping section is moved outside the printable area. The template is designed with an imaginary service company in mind. The main service offered by this company is to install lights for customers. It does not want to show invoice number (or proposal number, or quote number), customer # and customer name on the printed documents, so all these fields are moved outside the printable area. This is a big difference between a quote / proposal template and usual invoice template, yet Uniform Invoice Software can handle this form without any problem.

(From Detail Page - about 54 words) - InvoicingTemplate.com provides you this proposal template are free to download and you don't need to pay a single cent. You also don't need to get registered first or signing for a premium membership. All you need is to choose the one you like and click on download button of your favorite free proposal template.

(From Detail Page - about 35 words) - The Invoice Date field from the default sales invoice template shipped with Uniform Invoice Software installer program is still there, but it now has new label Proposed, indicating the date of the proposal or quote.

(From Detail Page - about 125 words) - The default sales invoice template of Uniform Invoice Software does have a check box column that is titled with "Taxable", but the column is placed outside the printable area. With this quote and proposal template, InvoicingTemplate.com implemented a check box column inside the printable area, and the check boxes are printable too. If you are interested in the technical detail of the check box column, it is actually a group of Active X control linked to hidden Excel cells - thanks to the flexibility of Excel. Microsoft Excel might be the only one that makes this type of customizations easy to do. And, Uniform Invoice Software takes the advantage of Excel, make a simple template to become a powerful invoicing / proposal / quote program.

(From Detail Page - about 56 words) - Every business is different. Or, you simply want to make your invoice / proposal / quote differs from others. We at InvoicingTemplate.com know this template might not match your requirements exactly. Don't be disappointed. You can still use this as a starting point or sample. Doing further customizations is easy with powerful tools provided by Excel.

LEARN MORE PDF